资源类型

期刊论文 313

会议视频 2

年份

2024 1

2023 10

2022 22

2021 20

2020 10

2019 19

2018 19

2017 16

2016 8

2015 15

2014 10

2013 14

2012 12

2011 13

2010 22

2009 27

2008 23

2007 19

2006 5

2005 3

展开 ︾

关键词

高压 3

临界风速 2

加压浸出 2

压力容器技术 2

工程水压爆破 2

泥水盾构 2

360°表征 1

CFD 1

COVID-19 1

DX桩 1

HBV相关疾病 1

S 特性 1

S型钢丝研制 1

X射线成像 1

《联合国气候变化框架公约》(UNFCCC) 1

三向受力状态 1

三维原子力显微镜 1

三维形貌重建 1

上部送风系统 1

展开 ︾

检索范围:

排序: 展示方式:

into the heat transfer characteristics of spiral wall with internal rib in a supercritical sliding-pressure

TANG Renhu, YIN Fei, WANG Haijun, CHEN Tingkuan

《能源前沿(英文)》 2007年 第1卷 第3期   页码 300-304 doi: 10.1007/s11708-007-0043-5

摘要: Within the pressure range of 9–28 MPa, mass velocity range of 600–1 200 kg/(m · s), and heat flux range of 200–500 kW/m, experiments were performed to investigate the heat transfer to water in the inclined upward internally ribbed tube with an inclined angle of 19.5 degrees, a maximum outer diameter of 38.1 mm, and a thickness of 7.5 mm. Based on the experiments, it was found that heat transfer enhancement of the internally ribbed tube could postpone departure from nucleate boiling at the sub-critical pressure. However, the heat transfer enhancement decreased near the critical pressure. At supercritical pressure, the temperature difference between the wall and the fluid increased near the pseudo-critical temperature, but the increase of wall temperature was less than that of departure from nucleate boiling at sub-critical pressure. When pressure is closer to the critical pressure, the temperature difference between the wall and the fluid increased greatly near the pseudo-critical temperature. Heat transfer to supercritical water in the inclined upward internally ribbed tube was enhanced or deteriorated near the pseudo-critical temperature with the variety of ratio between the mass velocity and the heat flux. Because the rotational flow of the internal groove reduced the effect of natural convection, the internal wall temperature of internally ribbed tube uniformly distributed along the circumference. The maximum internal wall temperature difference of the tube along the circumference was only 10 degrees when the fluid enthalpy exceeded 2 000 J/g. Considering the effect of acute variety of the fluid property on heat transfer, the correlation of heat transfer coefficient on the top of the internally ribbed tube was provided.

关键词: m ·     diameter     critical pressure     sub-critical pressure     maximum    

Structure improvement and strength finite element analysis of VHP welded rotor of 700°C USC steam turbine

Jinyuan SHI,Zhicheng DENG,Yong WANG,Yu YANG

《能源前沿(英文)》 2016年 第10卷 第1期   页码 88-104 doi: 10.1007/s11708-015-0387-1

摘要: The optimized structure strength design and finite element analysis method for very high pressure (VHP) rotors of the 700°C ultra-super-critical (USC) steam turbine are presented. The main parameters of steam and the steam thermal parameters of blade stages of VHP welded rotors as well as the start and shutdown curves of the steam turbine are determined. The structure design feature, the mechanical models and the typical position of stress analysis of the VHP welded rotors are introduced. The steady and transient finite element analysis are implemented for steady condition, start and shutdown process, including steady rated condition, 110% rated speed, 120% rated speed, cold start, warm start, hot start, very hot start, sliding-pressure shutdown, normal shutdown and emergency shutdown, to obtain the temperature and stress distribution as well as the stress ratio of the welded rotor. The strength design criteria and strength analysis results of the welded rotor are given. The results show that the strength design of improved structure of the VHP welded rotor of the 700°C USC steam turbine is safe at the steady condition and during the transient start or shutdown process.

关键词: 700°C ultra-super-critical unit     steam turbine     very high pressure rotor     structure strength design     strength design criteria     finite element analysis    

Microbial biodegradation of plastics: Challenges, opportunities, and a critical perspective

《环境科学与工程前沿(英文)》 2022年 第16卷 第12期 doi: 10.1007/s11783-022-1596-6

摘要:

● Health hazards of plastic waste on environment are discussed.

关键词: Plastic-waste     Polymers     Health-hazards     Biodegradation     Microorganisms     Enzymes    

Machine learning in building energy management: A critical review and future directions

《工程管理前沿(英文)》 2022年 第9卷 第2期   页码 239-256 doi: 10.1007/s42524-021-0181-1

摘要: Over the past two decades, machine learning (ML) has elicited increasing attention in building energy management (BEM) research. However, the boundary of the ML-BEM research has not been clearly defined, and no thorough review of ML applications in BEM during the whole building life-cycle has been published. This study aims to address this gap by reviewing the ML-BEM papers to ascertain the status of this research area and identify future research directions. An integrated framework of ML-BEM, composed of four layers and a series of driving factors, is proposed. Then, based on the hype cycle model, this paper analyzes the current development status of ML-BEM and tries to predict its future development trend. Finally, five research directions are discussed: (1) the behavioral impact on BEM, (2) the integration management of renewable energy, (3) security concerns of ML-BEM, (4) extension to other building life-cycle phases, and (5) the focus on fault detection and diagnosis. The findings of this study are believed to provide useful references for future research on ML-BEM.

关键词: building energy management     machine learning     integrated framework     knowledge evolution    

Reducing environmental impacts through socioeconomic transitions: critical review and prospects

《环境科学与工程前沿(英文)》 2023年 第17卷 第2期 doi: 10.1007/s11783-023-1624-1

摘要:

● Reducing environmental impacts through socioeconomic structural transitions.

关键词: Environmental pressures     Environmental impacts     Nexus     Supply chains     Trade     Coupled systems    

Advances in airborne microorganisms detection using biosensors: A critical review

《环境科学与工程前沿(英文)》 2021年 第15卷 第3期 doi: 10.1007/s11783-021-1420-8

摘要:

Humanity has been facing the threat of a variety of infectious diseases. Airborne microorganisms can cause airborne infectious diseases, which spread rapidly and extensively, causing huge losses to human society on a global scale. In recent years, the detection technology for airborne microorganisms has developed rapidly; it can be roughly divided into biochemical, immune, and molecular technologies.

关键词: Biosensor     Airborne microorganisms     Microbiological detection technology    

Effects of critical geometric parameters on the optical performance of a conical cavity receiver

Hu XIAO, Yanping ZHANG, Cong YOU, Chongzhe ZOU, Quentin FALCOZ

《能源前沿(英文)》 2019年 第13卷 第4期   页码 673-683 doi: 10.1007/s11708-019-0630-2

摘要: The optical performance of a receiver has a great influence on the efficiency and stability of a solar thermal power system. Most of the literature focuses on the optical performance of receivers with different geometric shapes, but less research is conducted on the effects of critical geometric parameters. In this paper, the commercial software TracePro was used to investigate the effects of some factors on a conical cavity receiver, such as the conical angle, the number of loops of the helical tube, and the distance between the focal point of the collector and the aperture. These factors affect the optical efficiency, the maximum heat flux density, and the light distribution in the conical cavity. The optical performance of the conical receiver was studied and analyzed using the Monte Carlo ray tracing method. To make a reliable simulation, the helical tube was attached to the inner wall of the cavity in the proposed model. The results showed that the amount of light rays reaching the helical tube increases with the increasing of the conical angle, while the optical efficiency decreases and the maximum heat flux density increases. The increase in the number of loops contributed to an increase in the optical efficiency and a uniform light distribution. The conical cavity receiver had an optimal optical performance when the focal point of the collector was near the aperture.

关键词: parabolic collector     conical cavity receiver     critical geometric parameters     optical performance    

MHD effect on the critical temperature differences of oscillatory thermocapillary convection in two-layer

Hulin HUANG, Xiaoming ZHOU,

《能源前沿(英文)》 2010年 第4卷 第2期   页码 155-160 doi: 10.1007/s11708-009-0063-4

摘要: The effect of different directional magnetic fields on critical temperature differences of oscillatory thermocapillary convection in a rectangular cavity with differentially heated side walls filled with two viscous, immiscible, incompressible fluids is simulated in the absence of gravity. In this two-layer fluid system, the upper layer fluid is the electrically non-conducting encapsulant boron oxide (BO), while the lower one is the electrically conducting molten indium phosphide (InP). The interface between the two fluids is assumed to be flat and non-deformable. The computational results show that all the magnetic fields along the , and directions can delay the transition from steady convection to oscillatory convection, and critical temperature differences increase with an increasing Hartmann number. Furthermore, the effect of a magnetic field along the direction is strongest, followed by that along the direction, and that along the direction is the weakest for the same intensity of the magnetic field.

关键词: magnetohydrodynamic     magnetic fields     thermocapillary convection     critical temperature difference     oscillatory convection     two-layer fluid system    

Deviation correction strategy for the earth pressure balance shield based on shield–soil interactions

《机械工程前沿(英文)》 2022年 第17卷 第2期 doi: 10.1007/s11465-022-0676-4

摘要: The control system presently used in shield posture rectification is based on driver experience, which is marginally reliable. The study of the related theory is flawed. Therefore, a decision-making approach for the deviation correction trajectory and posture rectification load for an earth pressure balance (EPB) shield is proposed. A calculation model of posture rectification load of an EPB shield is developed by considering the interactions among the cutter head, shield shell, and ground. The additional position change during the shield attitude correction is highlighted. The posture rectification loads and shield behaviors results can be solved by the proposed method. The influences of the stratum distribution (i.e., bedrock height in the upper-soft and lower-hard strata) on shield behaviors and posture rectification loads are analyzed. Results indicated that the increase of pitch angle in the upper-soft and lower-hard strata causes a sharp rise in vertical displacement. The bedrock height increases the magnitudes of the required posture rectification moments when hr/D > 0.5. For a tunnel with hr/D ≤ 0.5, the variation of hr/D has little effect on the posture rectification moments. Finally, the posture rectifying curves based on the theoretical model are compared with the target ones based on the double circular arc interpolation method. The required results can be obtained regardless of the soil–rock compound stratum distribution. The maximum rectification moment in the rock layer is almost 12.6 times that in the soil layer. Overall, this study provides a valuable reference for moment determination and the trajectory prediction of posture rectification in compound strata.

关键词: additional position change     deviation correction trajectory     earth pressure balance shield     mechanical model     posture rectification    

Adsorption behavior of antibiotic in soil environment: a critical review

Shiliang WANG,Hui WANG

《环境科学与工程前沿(英文)》 2015年 第9卷 第4期   页码 565-574 doi: 10.1007/s11783-015-0801-2

摘要: Antibiotics are used widely in human and veterinary medicine, and are ubiquitous in environment matrices worldwide. Due to their consumption, excretion, and persistence, antibiotics are disseminated mostly via direct and indirect emissions such as excrements, sewage irrigation, and sludge compost and enter the soil and impact negatively the natural ecosystem of soil. Most antibiotics are amphiphilic or amphoteric and ionize. A non-polar core combined with polar functional moieties makes up numerous antibiotic molecules. Because of various molecule structures, physicochemical properties vary widely among antibiotic compounds. Sorption is an important process for the environment behaviors and fate of antibiotics in soil environment. The adsorption process has decisive role for the environmental behaviors and the ultimate fates of antibiotics in soil. Multiply physicochemical properties of antibiotics induce the large variations of their adsorption behaviors. In addition, factors of soil environment such as the pH, ionic strength, metal ions, and organic matter content also strongly impact the adsorption processes of antibiotics. Review about adsorption of antibiotics on soil can provide a fresh insight into understanding the antibiotic-soil interactions. Therefore, literatures about the adsorption mechanisms of antibiotics in soil environment and the effects of environment factors on adsorption behaviors of antibiotics in soil are reviewed and discussed systematically in this review.

关键词: adsorption     antibiotics     environment factors     soil    

Experimental study of critical flow of water at supercritical pressure

Yuzhou CHEN, Chunsheng YANG, Shuming ZHANG, Minfu ZHAO, Kaiwen DU, Xu CHENG

《能源前沿(英文)》 2009年 第3卷 第2期   页码 175-180 doi: 10.1007/s11708-009-0029-6

摘要: Experimental studies of the critical flow of water were conducted under steady-state conditions with a nozzle 1.41 mm in diameter and 4.35 mm in length, covering the inlet pressure range of 22.1-26.8 MPa and inlet temperature range of 38-474°C. The parametric trend of the flow rate was investigated, and the experimental data were compared with the predictions of the homogeneous equilibrium model, the Bernoulli correlation, and the models used in the reactor safety analysis code RELAP5/MOD3.3. It is concluded that in the near or beyond pseudo-critical region, thermal-dynamic equilibrium is dominant, and at a lower temperature, choking does not occur. The onset of the choking condition is not predicted reasonably by the RELAP5 code.

关键词: critical flow     supercritical water-cooled reactor(SCWR)     reactor safety     loss of coolant accident(LOCA)    

Adsorption in combination with ozonation for the treatment of textile waste water: a critical review

Shraddha Khamparia,Dipika Kaur Jaspal

《环境科学与工程前沿(英文)》 2017年 第11卷 第1期 doi: 10.1007/s11783-017-0899-5

摘要: A combination of adsorption with ozonation proved best for dye removal. Toxicity of the textile effluents can be remarkably reduced by combined method. Wide scope for choice of natural materials for treatment of textile dyes. Intrusion of synthetic textile dyes in the ecosystem has been recognized as a serious issue worldwide. The effluents generated from textiles contain large amount of recalcitrant unfixed dyes which are regarded as emerging contaminants in the field of waste water study. Removal of various toxic dyes often includes diverse and complex set of physico-chemical, biological and advanced oxidation processes adopted for treatment. Adsorption in itself is a well-known technique utilized for treatment of textile effluents using a variety of adsorbents. In addition, ozonation deals with effective removal of dyes using high oxidising power of ozone. The review summarizes dye removal study by a combination of ozonation and adsorption methods. Also, to acquire an effective interpretation of this combined approach of treating wastewater, a thorough study has been made which is deliberated here. Results asserts that, with the combined ability of ozone and a catalyst/adsorbent, there is high possibility of total elimination of dyes from waste water. Several synthetically prepared materials have been used along with few natural materials during the combined treatment. However, considering practical applicability, some areas were identified during the study where work needs to be done for effective implementation of the combined treatment.

关键词: Adsorption     Ozonation     Catalytic Ozonation     Textile dyes     Mineralization    

Interfacial induction and regulation for microscale crystallization process: a critical review

《化学科学与工程前沿(英文)》 2022年 第16卷 第6期   页码 838-853 doi: 10.1007/s11705-021-2129-8

摘要: Microscale crystallization is at the frontier of chemical engineering, material science, and biochemical research and is affected by many factors. The precise regulation and control of microscale crystal processes is still a major challenge. In the heterogeneous induced nucleation process, the chemical and micro/nanostructural characteristics of the interface play a dominant role. Ideal crystal products can be obtained by modifying the interface characteristics, which has been proven to be a promising strategy. This review illustrates the application of interface properties, including chemical characteristics (hydrophobicity and functional groups) and the morphology of micro/nanostructures (rough structure and cavities, pore shape and pore size, surface porosity, channels), in various microscale crystallization controls and process intensification. Finally, possible future research and development directions are outlined to emphasize the importance of interfacial crystallization control and regulation for crystal engineering.

关键词: interfacial crystallization     heterogeneous nucleation     supersaturation     micro/nanostructure     process control and intensification    

Palmitoylation of GNAQ/11 is critical for tumor cell proliferation and survival in GNAQ/11-mutant uveal

《医学前沿(英文)》 2022年 第16卷 第5期   页码 784-798 doi: 10.1007/s11684-021-0911-0

摘要: More than 85% of patients with uveal melanoma (UM) carry a GNAQ or GNA11 mutation at a hotspot codon (Q209) that encodes G protein α subunit q/11 polypeptides (Gαq/11). GNAQ/11 relies on palmitoylation for membrane association and signal transduction. Despite the palmitoylation of GNAQ/11 was discovered long before, its implication in UM remains unclear. Here, results of palmitoylation-targeted mutagenesis and chemical interference approaches revealed that the loss of GNAQ/11 palmitoylation substantially affected tumor cell proliferation and survival in UM cells. Palmitoylation inhibition through the mutation of palmitoylation sites suppressed GNAQ/11Q209L-induced malignant transformation in NIH3T3 cells. Importantly, the palmitoylation-deficient oncogenic GNAQ/11 failed to rescue the cell death initiated by the knock down of endogenous GNAQ/11 oncogenes in UM cells, which are much more dependent on Gαq/11 signaling for cell survival and proliferation than other melanoma cells without GNAQ/11 mutations. Furthermore, the palmitoylation inhibitor, 2-bromopalmitate, also specifically disrupted Gαq/11 downstream signaling by interfering with the MAPK pathway and BCL2 survival pathway in GNAQ/11-mutant UM cells and showed a notable synergistic effect when applied in combination with the BCL2 inhibitor, ABT-199, in vitro. The findings validate that GNAQ/11 palmitoylation plays a critical role in UM and may serve as a promising therapeutic target for GNAQ/11-driven UM.

关键词: uveal melanoma     mutant GNAQ/11     palmitoylation     BCL2     combination target therapy    

A critical review of the emerging research on the detection and assessment of microplastics pollution

《环境科学与工程前沿(英文)》 2022年 第16卷 第10期 doi: 10.1007/s11783-022-1563-2

摘要:

● Coastal and marine regions are the most studied for microplastic pollution.

关键词: Plastic pollution     Waste management     Global south     Sustainability     Marine pollution    

标题 作者 时间 类型 操作

into the heat transfer characteristics of spiral wall with internal rib in a supercritical sliding-pressure

TANG Renhu, YIN Fei, WANG Haijun, CHEN Tingkuan

期刊论文

Structure improvement and strength finite element analysis of VHP welded rotor of 700°C USC steam turbine

Jinyuan SHI,Zhicheng DENG,Yong WANG,Yu YANG

期刊论文

Microbial biodegradation of plastics: Challenges, opportunities, and a critical perspective

期刊论文

Machine learning in building energy management: A critical review and future directions

期刊论文

Reducing environmental impacts through socioeconomic transitions: critical review and prospects

期刊论文

Advances in airborne microorganisms detection using biosensors: A critical review

期刊论文

Effects of critical geometric parameters on the optical performance of a conical cavity receiver

Hu XIAO, Yanping ZHANG, Cong YOU, Chongzhe ZOU, Quentin FALCOZ

期刊论文

MHD effect on the critical temperature differences of oscillatory thermocapillary convection in two-layer

Hulin HUANG, Xiaoming ZHOU,

期刊论文

Deviation correction strategy for the earth pressure balance shield based on shield–soil interactions

期刊论文

Adsorption behavior of antibiotic in soil environment: a critical review

Shiliang WANG,Hui WANG

期刊论文

Experimental study of critical flow of water at supercritical pressure

Yuzhou CHEN, Chunsheng YANG, Shuming ZHANG, Minfu ZHAO, Kaiwen DU, Xu CHENG

期刊论文

Adsorption in combination with ozonation for the treatment of textile waste water: a critical review

Shraddha Khamparia,Dipika Kaur Jaspal

期刊论文

Interfacial induction and regulation for microscale crystallization process: a critical review

期刊论文

Palmitoylation of GNAQ/11 is critical for tumor cell proliferation and survival in GNAQ/11-mutant uveal

期刊论文

A critical review of the emerging research on the detection and assessment of microplastics pollution

期刊论文